Blank after standby

[ABx]

I have been noticing something, although it doesn't happen 100% of the time. When I come out of standby, or if I happen to unplug it from the USB, it will sit there with the backlight on but not showing any data. Once in a while it will start cycling through the data after some time, but most of the time it never does until I exit the software and then restart it.

[Alex]

We are aware that there may be some issues with using Pertelian in conjunction with hibernation and standby. We will look into the matter. Now unplugging it from the USB and still having the backlight on is highly unlikely since Pertelian draws all its power from the USB connection. Could you elaborate on that?

[ABx]

Sorry, didn't mean that the backlight stays on while it's unplugged, it's that the backlight comes back on when it gets plugged back in, but nothing else gets restored.

[Alex]

It's not weird for the backlight to come up just when you plug the unit in. Make sure you close Pertelian before shutting down or putting your computer on standby. You shouldn't have the Pertelian application running when you plug Pertelian in. You should plug the unit in first, then start Pertelian, otherwise, you'll just get the backlight on and it won't respond.

I'm not sure if that helps at all.